To Next PageTo Next PageWhy is a function indication not shown on my Panasonic SDR-S150?
If a function indication such as mode indication, remaining time indication, or time code indication is not shown on your Panasonic Camcorder, check if you set [SETUP]>[DISPLAY]>[OFF], indications other than warnings and date indications disappear.
What does 'PUSH THE RESET SWITCH' mean on my Panasonic Camcorder?
When “PUSH THE RESET SWITCH” is displayed on your Panasonic Camcorder, remove the SD card to protect the data and then press the [RESET] button with the projecting part of the hand strap. If the message persists, the unit needs repair.
Why does my Panasonic Camcorder battery run down so quickly?
Your Panasonic Camcorder battery may be running down quickly because of several reasons. Try charging it with the AC adapter. Ambient temperature affects battery performance; it drains faster in cold environments. Also, the battery might be worn out and unable to hold a charge, especially if the operating time remains short even after a full charge.
Why isn't my Panasonic SDR-S150 recording even with an SD card inserted?
If your Panasonic Camcorder isn't recording despite having power and an SD card inserted, check the following: Ensure the write protect switch isn't set to [LOCK]. Free up memory by copying scenes to a PC and deleting unnecessary ones. Make sure the mode dial is set to the correct mode. Ensure the card slot cover is closed.
Why isn't my Panasonic SDR-S150 Camcorder recognized by the PC even when connected by USB?
If your Panasonic Camcorder is not recognized by the PC even when connected by the USB cable, install the driver and check the connections. Also, the unit is not recognized if it is set to motion picture playback mode.
What to do if my Panasonic Camcorder is not operating normally?
If your Panasonic Camcorder is powered up but not operating normally, try the following: First, press the [RESET] button. If that doesn't work, remove the battery or disconnect the AC adapter, wait about 1 minute, and then reinsert the battery or reconnect the AC adapter. Finally, turn the power on again.
What does the warning/alarm indication [°] mean on my Panasonic Camcorder?
If the warning/alarm indication [°] appears when your Panasonic Camcorder is operated in the WEB camera mode, it means you cannot record onto the card in the WEB camera mode.
Why although this unit is correctly connected to a TV, playback images cannot be seen and the images are vertical?
If, although your Panasonic Camcorder is correctly connected to a TV, playback images cannot be seen and the images are vertical, read the operating instructions of your TV and select the channel that matches the input used for the connection. Also, change the setting to match the aspect ratio of the TV by pressing the menu button, then select [SETUP]> [TV ASPECT]>[16:9] or [4:3].
What to do if the SD card is inserted in another device and it is not recognized?
If the SD card from your Panasonic Camcorder is not recognized when inserted in another device, check that the device is compatible with the capacity or type of SD card (SD Memory Card/ SDHC Memory Card) that you inserted.
Why do the images on my Panasonic SDR-S150 SD card not look normal?
If the images on your Panasonic Camcorder SD card do not look normal, the data may be destroyed, potentially by static or electromagnetic waves.
General| Filter size | 37 mm |
|---|---|
| Digital zoom | 700 x |
| Optical zoom | 10 x |
| Image stabilizer | Yes |
| Focal length range | 3 - 30 mm |
| Focal length (35mm film equivalent) | 46.1 - 461 mm |
| Sensor type | CMOS |
| Total megapixels | 3.1 MP |
| Optical sensor size | 1/6 \ |
| Display diagonal | 2.8 \ |
| Flash memory | 2048 MB |
| Power requirements | DC 7.4/ 9.3 V |
| Camera shutter speed | 1/50 - 8000; 1/25 - 2000 s |
| Minimum illumination | 1 lx |
| USB 2.0 ports quantity | 1 |
| Compatible memory cards | SD |
| Product color | Silver |
Weight and Dimensions| Depth | 81 mm |
|---|---|
| Width | 50 mm |
| Height | 97 mm |
| Weight | 243 g |
Grants rights to use software; intellectual property not transferred.
Software provided "AS-IS" without warranty; Matsushita not liable.
Termination for contravening terms; requires destruction of software.
Important safety precautions and warnings to reduce risks.
Explains the remote control's buttons and usage.
Steps and checks to perform before starting recording.
Instructions for recording video clips.
Allows subjects to be focused manually.
Adjusts exposure settings manually.
Instructions for taking still photos.
How to delete recorded video or photo files.
Initializes the SD card for use.
Connecting the camera to a computer.
Guide to installing the video editing software.
Steps to install the webcam driver.
Steps to connect and verify PC recognition.
How to use the camera for video calls.
Checks if the camera driver is installed correctly.
Troubleshooting for unrecognized drivers.
Steps to power on the camera.
Steps to power off the camera.
For recording video clips.
Steps for connecting the unit for webcam use.
Icons for video playback.
Icons for photo playback.
Solutions for when the unit won't power on.
Troubleshooting short battery life and rapid drain.
Solutions for unresponsive unit and general abnormal operation.
Explains the concept and adjustment of white balance.
Details warranty periods for parts and labor.
How to obtain warranty service.
Exclusions from warranty coverage.
