Panasonic SDR-S150 - Setting date and time

29
VQT0X39
If the screen shows the incorrect date/time, then adjust it.
¬ Rotate the mode dial to select or .
1 Press the menu button, then use the
cursor button to select [ BASIC]#
[ CLOCK SET]#[YES]. (P27)
2 Press the cursor button left or right to
select the item (year/month/day/
hours/minutes) to be set. Then, press
the cursor button up or down to set
the desired value.
≥ The year will change as follows:
2000, 2001, ..., 2099, 2000, ...
≥ When [Y/M/D] or [D/M/Y] has been set for
[DATE FORMAT], the 24-hour system is used
to display the time. When [M/D/Y] has been
set, the 12-hour system is used.
3 Press the button in the center to enter
the selection.
≥ After pressing the menu button to finish the
setting, check the date and time display.
≥ The clock function starts at [00] seconds.
Changing the display style
Press the menu button, select
[SETUP]#[ DATE FORMAT], then
use the cursor button to select the desired
display style. (P27)
Setting date and time
ワイド
MENU
SETUP ENTER
EXIT
SCENE MODE
WIDE
WIND CUT
CLOCK SET
BASIC
NO
YES
REC MODE
MENU
EXIT
CLOCK SET
SET ENTER
SETUP
DEC 15 03 42 PM
2006
MENU
SETUP ENTER
EXIT
DISPLAY
FORMAT CARD
DATE/TIME
QUICK START
SETUP
Y/M/D
M/D/Y
D/M/Y
1/3
DATE FORMAT
Display style Screen display
Y/M/D
15:42
2006.12.15
M/D/Y
3:42 PM
DEC 15 2006
D/M/Y
15:42
15.12.2006
VQT0X39ENG.book 29 ページ ２００６年６月１４日 水曜日 午前１０時５１分