39
VQT0X39
By focusing only on the subject and blurring the background, the image can be
impressive. This unit can focus on the subject at a distance of approx. 50 cm (20 inch).
¬ Rotate the mode dial to select or .
1 Press the button in the center of the
cursor button to display the icon
shown in the illustration.
2 Press the cursor button up, then
select the [ ] tele-macro icon.
≥ The [ ] icon flashes orange, then lights
white.
≥ If the magnification is 10k or less, then it is
automatically set to 10k.
To cancel the tele-macro function
Select the [ ] icon again.
Tele-macro function
This is for
bringing only what you want to record into focus to take close-ups.
≥ If a sharper focus cannot be achieved, adjust the focus manually. (P48)
≥ In the following cases, the tele-macro function is canceled automatically.
– The zoom magnification becomes lower than 10k.
– The power is turned off or the mode dial is set to a mode other than motion picture
recording mode or still picture recording mode.
VQT0X39ENG.book 39 ページ ２００６年６月１４日 水曜日 午前１０時５１分
To Next Page
Loading...
