Panasonic SDR-S150 - Manual focus adjustment

48
VQT0X39
If auto focusing is difficult due to the conditions, then manual focusing is available.
¬ Rotate the mode dial to select or .
1 Set the [AUTO/MANUAL/FOCUS]
switch to [MANUAL].
2 Move the switch down and set it to
the [FOCUS] position.
≥ The manual focus indication [1MF] will be
displayed.
3 Press the cursor button left or right to
bring the subject into focus.
≥ When focused with a wide angle, the subject
may not be in focus when zoomed in. First,
zoom in on the subject, and then focus on it.
To restore to the automatic adjustment
Move the [AUTO/MANUAL/FOCUS] switch down again to the [FOCUS] position.
≥ You can also restore the auto focusing by setting the [AUTO/MANUAL/FOCUS]
switch to [AUTO].
Manual focus adjustment
This allows subjects to be focused manually.
MNL
MNL
VQT0X39ENG.book 48 ページ ２００６年６月１４日 水曜日 午前１０時５１分