Panasonic SDR-S150 - Wind Noise Reduction Function; This Is for Reducing the Wind Noise; Coming into the Microphone When

42
VQT0X39
¬ Rotate the mode dial to select .
Press the menu button, then use the
cursor button to select [ BASIC]>
[ WIND CUT]>[ON]. (P27)
To cancel the wind noise reduction function
Press the menu button, then use the cursor button to select [ BASIC]>
[ WIND CUT]>[OFF]. (P27)
Wind noise reduction function
This is for reducing the wind noise coming into the microphone when recording.
MENU
SETUP ENTER
EXIT
SCENE MODE
WIDE
WIND CUT
CLOCK SET
BASIC
OFF
ON
REC MODE
≥ This function’s default setting is [ON].
≥ Reduces the wind noise depending on the wind strength. (If this function is activated in
strong winds, the stereo effect may be reduced. When the wind weakens, the stereo
effect will be restored.)
VQT0X39ENG.book 42 ページ ２００６年６月１４日 水曜日 午前１０時５１分