17
VQT0X39
1 Remove the battery cover.
1 While pushing the battery cover,
2 slide it in the direction of the arrow.
≥ Push A while sliding.
2 Insert the battery.
1 Place the battery label side up.
2 Insert the projecting parts of the battery
in the holes on the unit.
3 Put the battery cover back in its
original place.
A Label
B Projecting parts
Removing the battery
Remove the battery cover, then
remove the battery.
≥ Before removing the battery, be sure to set the
[ON/OFF] switch to [OFF] and check that the
status indicator is off.
≥ After removing the battery, put the battery
cover back in its original place.
Inserting/Removing the Battery
A
22
11
1
2
3
B
A
VQT0X39ENG.book 17 ページ ２００６年６月１４日 水曜日 午前１０時５１分
To Next Page
Loading...
