RQT7022
32
A
Various Play Using the
Wireless Remote Control
B
(For video CDs and audio CDs)
Playing tracks in a particular
sequence (Program play) A
With program play, you can program up to 24 tracks on
the disc in any order you choose.
Preparation:
•
Set play mode selector to [PBC OFF].
•
Set the unit to the stop mode. (See page 18.)
1 Press [PROGRAM].
2 Press the numeric buttons corres-
ponding to the track number in
sequence.
a Track number
b Programmed order
To select a two-digit track number:
Press [h10] then the numeric buttons corresponding
to the track number.
Example:
15: [h10]→[1]→[5]
24: [h10]→[2]→[4]
L To cancel a programmed track B
Press [CLEAR] during stop mode.
The track you programmed last will be cancelled.
L To cancel program mode
Press [PROGRAM] again.
3 Repeat steps 1 and 2 to program all
the desired tracks.
4 Press [: SELECT].
The unit stops and the program is cleared when all
the programmed tracks have been played.
L If “ ” is displayed
No more tracks can be programmed.
L To confirm the programmed contents B
Press [RECALL]. (The track numbers and their sequence
appear in order, one after the other.)
L To clear the program B
Press [L].
For your reference:
•
The tracks play in the order they were programmed.
•
Press [g PREV] or [f NEXT] to skip tracks.
If “
” is selected during program play, only the tracks in
the programmed sequence are repeated.
1
2
2
4
1
RECALL
To Next Page
Loading...
