step4
inner lid
inner pan
step3
Wipe the bottom of the inner pan and make
sure the inner lid and steam cap are properly
assembled. Make sure the inner lid and
steam cap are properly assembled.
Put inner pan back into the rice cooker
and close the lid.
A. Make sure the inner pan is contacting
the cast heater.
B. On closing the outer lid, make sure there
is a clicking sound.
With the rinsed rice in the pan, measure
water level for the amount of rice being made.
(use cold water)
A. Pour water into the inner pan while on a flat surface.
B. Add water to the level indicated that is equal to the
number of cups of rice in pan. (White rice only.)
NOTE: If there is a question
follow the package
directions for the ratio
of water to rice.
inner pan
Properly measured Too Much. Too Little.
step1
step2
Measure rice with the measuring cup (180 ml)
(included) and pour into inner pan.
Select a clean, flat area on
your counter to place the rice
cooker.
DO NOT place rice cooker near
gas or electric range.
DO NOT operate the rice cooker
empty.
Be sure to plug the rice cooker into
a grounded wall outlet rated
120 V, 60 Hz.
Remove inner pan from cooker
and rinse the rice.
A. Wash rice quickly with plenty
of water, and dispose of the water
immediately. (Rice absorbs water
easily at first)
B. Repeat until water is clear (3x)
(Some water will remain with the rice)
Space & Power
Requirements
B
Rice Cooking Guide
To Previous Page
Loading...
