15
•
Do not insert parts from the reverse side of the board.
•
When testing with a multimeter during continuous tests, do not use high resistance ranges (×10,000), which may subject ICs and
other components on the board to excess voltage and thus cause damage.
•
Keep soldering time as short as possible (within a few seconds)
•
Unplug the power cord before replacing any components.
•
Be aware of the risk of electric shock or injury when handling a live control board. The control board's transformer carries 220 V AC.
IP3830_SR-DF101_Eng_19_121224.in章节1:15 章节1:15 2012-12-24 17:19:41
To Next Page
Loading...
