Panasonic SR-FC108 - Keep Warm Function; Automatic Keep Warm; Manual Reheating

What to do when...
24 25
If burning is a concern.
1
Press and set “◄” to “Quick”.
OOSelect “Quick” under “Pearl Rice” or “Jasmine
Rice”.
2
Press .
You will not hear a beep.
Press .
You will not hear a beep.
Press .
3
Press .
Selec t “02”.
Press .
4
Press .
Set to “So:Lo”.
After 10 seconds
( Setting ends automatically.)
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
1
Press and set “◄” to “Quick”.
OOSelect “Quick” under “Pearl Rice” or “Jasmine
Rice”.
2
Press and hold down .
(for approximately 5 seconds)
OOThis change does not switch off the button sounds.
What to do when...
OOIf the suggestions on P. 22–23 do not bring about any improvement,
you can change the settings.
OOSteps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display returns
to the current time. (Setting cannot be made.)
→ Please restart the procedure.
OOAfter the setting is completed, the display returns to the current time.
OOTo go back to the previous setting, follow the procedure again.
If you want to change the keep warm temperature.
(74→76→72)
1
Press and set “◄” to “Quick”.
OOSelect “Quick” under “Pearl Rice” or “Jasmine
Rice”.
2
Press .
You will not hear a beep.
Press .
You will not hear a beep.
Press .
3
Press .
OOThe default setting is “74”.
4
When it smells
Press .
Set to “76”.
After 10 seconds
(Setting ends
automatically.)
When colour has changed or it is dry
Press .
Set to “72”.
After 10 seconds
(Setting ends
automatically.)