- 16 -
SR-DE103, 183 / SR-MS103, 183
• Remove the tabs at (a) gently, then take out the P.C.B.
(operating side) while lifting.
• Remove another fire-retardant tape attached on the
bottom of the P.C.B.
• Remove the retaining screws gently. Then take out
the P.C.B. (power side) while lifting.
7. Take out the P.C.B. component
Assembly of P.C.B. base (comp.)
• When assembling the P.C.B. base (comp.), please proceed in reverse to disassembly.
• When reassembling, make sure to attach the fire-retardant tapes as what they are before removing.
8.
Note :
To Next Page
Loading...
