Panasonic SR-MS103

- 18 -
SR-DE103, 183 / SR-MS103, 183
11. REPLACING OF PAN SENSOR AND THERMAL FUSE
• Remove the cast heater in referring to replacing
of cast heater.
1. Remove the cast heater
Remove the pan sensor
Replacing of thermal fuse
• Upright the tabs (3 places) as shown in the right
figure, then take out the pan sensor.
Note :
• Do not deform the spring when removing.
2.
• The procedure of replacing of pan sensor is actually
a procedure of replacing of thermal fuse A/B, for
they both fixed inside of pan sensor.
• Please reassemble the pan sensor in reverse to disassembly.
Note :
• Do not deform the spring when assembling.
• Do not slant the spring when assembling.
• Check the direction of pan sensor.
3.
Reassembly4.