Panasonic SR-SPX103 - Page 18

34 35
What to do when...
OIf the suggestions on P.32–33 do not bring about any
improvement, you can change the settings.
OBuzzers may sound during operating, however operations
should be continued.
OSteps 2, 3 and 4 must each be completed within 16 seconds.
When no operation is performed for 16 seconds, the display
returns to the current time. (Setting cannot be made.)
 Please restart the procedure.
OAfter the setting is completed, the display returns to the
current time.
OTo go back to the previous setting, follow the procedure again.
To increase the keep warm
temperature. (60 to 74)
1
Press twice
Press
and select “Quick”
Flashing
O Select “Quick” under “White Rice”.
2
Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3
Press
4
Press
Set to
“74”.
Pressing the button cycles through
the temperatures (order of 74, 76,
72, 60, 74).
After 10 seconds
(
Setting ends
)
automatically.
O If an odour is generated after the
change to “74”, set to “76”. If the rice
is discoloured or dry, set to “72”.
O ECONAVI will not operate after the
change. Steam will not be injected
when rice is kept warm.
O The default setting is “60”.
O If the setting is changed back to “60”,
the setting of “If the keep warm state
is a concern.” (P.35) is also changed
back to “Ho:02”.
If the boiling sound is
a concern when keeping
rice warm.
(Stop steam injection.)
1
Press twice
Press
and select “Quick”
Flashing
O Select “Quick” under “White Rice”.
2
Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3
Press
Select
“04”.
O There is no “03” setting.
Press
4
Press
Delete
“Steam”.
After 10 seconds
(
Setting ends
)
automatically.
O After the change, no steam will be
used during the keep warm state.
To stop the buzzer sounding
(end sound) during cooking,
reheating and cleaning.
1
Press twice
Press
and select “Quick”
Flashing
O Select “Quick” under “White Rice”.
2
Press and hold down
(for approximately 5 seconds)
O This change does not switch off the
button sounds.
If burning is a concern.
1
Press twice
Press
and select “Quick”
Flashing
O Select “Quick” under “White Rice”.
2
Press
You will not hear
a beep.
Press
You will not hear
a beep.
Press
3
Press
Select
“02”.
Press
4
Press
Set to
“So:Lo”.
After 10 seconds
(
Setting ends
)
automatically.
If the keep warm state is a concern.
(
If there is a large amount of mist on the
)
Inner Lid and Inner Pan.
The rice has become discoloured or dry.
1
Press twice
Press
and select “Quick”
Flashing
O Select “Quick” under “White Rice”.
2
Press You will not hear a beep.
Press
You will not hear a beep.
Press
3
Press Select “06”.
O There is no “03” and “05” setting.
Press
4
Q When there is a large quantity of mist.
Press Set to “Ho:03”.
After 10 seconds
( Setting ends automatically.)
Q When rice becomes discoloured or dry.
Press Set to “Ho:01”.
After 10 seconds
( Setting ends automatically.)
O Change to "Ho:03", the keep warm temperature is also
changed from 60 to 74. ECONAVI will not operate after the
change. Steam will not be injected when rice is kept warm.
O The default setting is “Ho:02”.
* This setting is not available when increasing the keep warm
temperature.
What to do when...