EasyManua.ls Logo

Panasonic SR-TEG10

Panasonic SR-TEG10
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 7 -
Condition Troubleshooting Remedy
• Replace the center thermostat.
• Replace the inner pan or the
cast heater.
• Replace the cast heater.
• Explain the proper operation.
• Earlier cut off.
• Excessive burning
• Poor boiling up.
• Too hard
• Too soft
• Cored rice
Insufficient boiling
• Immediately after the switch is turned
off, open the cap.
• Rice is excessive or insufficient.
• Water is excessive or insufficient.
• The switch is turned off once during
boiling.
• Rice has not been scooped and mixed
well.
Is the pan bottom properly contacted with
the cast heater?
Is the cast heater conductive?
Improper operation
Yes
No
No
• Explain the proper operation.
• Mixed rice is boiled.
• Rice is not washed sufficiently.
(Bran remains still).
• The pan bottom is conditioned to
generate burning easily.
• Germ rice or wheat-mixed rice is boiled.
• The voltage is lower than specified.
• Water is excessive.
Improper operation
Yes
No
(Check with the bubbling test).
Does the center thermostat operate
properly?
Yes
Yes
Yes
No
(Check with the operation test).
• Adjust the control lever.
Is the rice boiling control lever properly
adjusted?
No
• Replace the center thermostat.
Does the center thermostat operate
properly?
Yes
Yes
No
(Check with the evaporation test).
• Adjust the control lever.
Is the rice boiling control lever properly
adjusted?
No
(More than light
brown)
SR-TEG10 / SR-TEG18

Related product manuals