To Next PageTo Next PageWhat to do if my Panasonic SR-TEJ10 Rice Cooker cutoff earlier?
If your Panasonic Rice Cooker cuts off too early, you can try the following: replace the inner pan or the cast heater, replace the center thermostat, adjust the control lever, replace the cast heater, or ensure that you are operating it properly.
What to do if Panasonic Rice Cooker is not boiling but the light is on?
If the rice is not boiling in your Panasonic Rice Cooker, but the indication lamp is lit, replace the cast heater.
General| Brand | Panasonic |
|---|---|
| Model | SR-TEJ10 |
| Category | Rice Cooker |
| Language | English |
Checks pan bottom contact with heating plate by observing boiling water bubbles.
Tests evaporation rate of water on pan bottom using tissue paper.
Measures heat retention capability by checking temperature after warming.
Adjusts auxiliary lever to ensure correct micro-switch operation during boiling.
Procedure for removing the dew collector and hinge cover.
Steps to pry and turn the inner enclosure to separate it from the upper frame.
List of part numbers, names, and quantities for replacement.
List of standardized metal parts like screws and washers with part numbers.
Details of packing materials and components for shipping and packaging.
