Panasonic SV-3800

Setting the nominal output level (mode No.6)
Various types of audio equipment work at different reference levels. The level of the analog outputs can be
reduced in this mode. This feature makes it possible to vary the analog output level over a 14 dB range. This
virtually eliminates any likelihood of level incompatibility with other equipment.
(1) Nominal output level setting methods
This level can be set in the following 2 ways.
1) The level is set using the SKIP buttons or SHUTTLE SEARCH dial in +4 dBu to -6 dBu nominal output level
mode.
2) The level is set using FF or REW buttons for selecting +4 dBu (changeable) or —10 dBu nominal output level mode.
(2) Setting the nominal output level
Button operated Operation Display
FF/CUE button This button establishes the mode in which the nominal Example: A 04
output level can be set to any value between +4 dBu and
—6dBu.
SKIP button (forward Each time the forward button is pressed, the setting is
or reverse) incremented by 1 to +4, each time the reverse button is
pressed, the setting is decremented by 1to -6.
SHUTTLE SEARCH Thesetting is continuously incremented or decremented by
dial turning the dial in the REVERSE or FORWARD direction.
REW/REV button the setting is on -10dBu A-10
E-32