Panasonic SX-MB100 - Advanced Setting Adjustments; Split Point Configuration; Factory Reset

SPLIT POINT
SPLIT FUIHT? G 3
[мену]
— Press a key on the keyboard to specify the desired
split point.
• The name of the specified key is indicated on the
display.
« The factory-preset (initialized) split point is at G3.
• The key at the split point is the lowest note of the right
keyboard section.
TEMPO DETECT
НШТШ RETRY: OM
[MENU]
= Use the VALUE buttons to switch the CD TEMPO DE-
TECT function ON or OFF.
ON: Tempo detect works each time the CD song
changes (initialized setting).
OFF: Tempo detect does not work when the CD song
changes.
FOOT SWITCH
FOOT
Shi
SLETRIH
[MENU]
= Џѕе the VALUE buttons to assign a function to the
Foot Switch (separately sold option).
• Select from SUSTAIN, START/STOP [ST/STOP], and
GLIDE.
• Ifthe polarity of the switch is reversed, select a function
name that is preceded by a – mark.
* When the Foot Switch is depressed, the specified
function will turn on.
• The glide effect “bends” the pitch down by about one
semitone. (This effect may not work for some sounds.)
* For Foot Switch connection, refer to page 30.
LCD CONTRAST
ИШ COHTEHST:
[MENU]
= Use the VALUE buttons to adjust the display so that
it is easy to read (1 to 10).
LIGHT SHOW
LIGHT SHOW Ob
[MENU]
= Use the VALUE buttons to set the LIGHT SHOW to
ON or OFF.
ON: When the power is on, if this instrument has been
silent for a while, the pad buttons and the indicators
start to flash in a kind of "light show".
OFF: The light show does not start.
ALL INITIAL
ARE
‘OL!
SURE?
(MENU]
О
— Press the EXECUTE button.
« "COMPLETE" is shown on the display, and all the
settings of this instrument are reset to their factory-
preset status.
e The settings can also be initialized by turning off the
power once, then turning on the power again while
depressing both TEMPO + and - buttons.
• Playback will stop if this operation is performed while
a CD is being played.
• The following settings will be initialized by this proce-
dure.
— KEYBOARD VOLUME
— CD/FM TUNER VOLUME
— FM PRESET TUNING memories
— LIGHT SHOW on/off setting
m Memory function
The settings of this instrument are retained as long as
the AC adaptor remains plugged into an electrical outlet.
* The following settings are retained even when the AC
adaptor is disconnected from the electrical outlet.
— FM PRESET TUNING memories
— LIGHT SHOW on/off setting
29
QQTGO0626