Panasonic SX-MB100 - Page 30

Connection terminals and optional accessories
© © 9
Connection terminals
ToT
РНОМЕ5/
LINE OUT
MIDI OUT
Used for transmitting MID! data. Connect the other end
of the MID! cable to the MIDI IN termínal of another in-
strument. This terminal is used, for example, to generate
sound from a connected instrument by playing this in-
strument.
MIDI IN
Used for receiving MIDI data. Connect the other end of
the MIDI cable to the MIDI OUT terminal of another in-
strument. This terminal is used, for example, to generate
sound from this instrument by playing a connected in-
strument.
• A MIDI cable is used for MIDI connections.
Separately sold option
SZ-P1 Foot Switch
e For the various functions that can be controlled with
a Foot Switch, refer to pages 27, 29.
30
QQTG0626
(Rear panel)
FOOT SW
An optional SZ-P1 Foot Switch (sold separately) can be
connected to this termina! to control various functions.
PHONES/LINE OUT (output level 1.5 Vrms, 16 Q)
Headphones, a keyboard amplifier, or stereo equipment
can be connected to this terminal. When another аррага-
tus is connected to this terminal, the speaker system is
automatically switched off, and sound is heard only
through the connected device.