To Next PageTo Next Page
Need help?Do you have a question about the Panasonic TB11N Series and is the answer not in the manual?
Guidelines to prevent wrong operation, failure, and fault current during installation.
Instructions for fixing the switch to a surface using screws or other devices.
Details for fixing the switch to a panel using an optional panel fixture.
Critical warnings regarding misuse, electric shock, fire, and severe consequences.
Important cautions about load control, wiring, terminals, and power source connection.
Diagram for connecting the time switch to directly control a load.
Wiring diagrams for single-phase and three-phase loads using contactors.
Explanation of the Ni-MH battery for power failure compensation and charging.
Procedure and parts information for replacing the Ni-MH battery.
Instructions on how to set the ON and OFF times using setting pins.
Guide to setting the current time by turning the dial clockwise.
Using the switch for temporary ON/OFF status or testing after wiring.
Diagram identifying key components of the time switch.
Detailed specifications including voltage, frequency, power consumption, and contact capacity.
Technical drawings showing the physical dimensions of the time switch in millimeters.
Table for connecting lamps (mercury vapor, fluorescent) based on wattage and power factor.
Common issues like load not starting or clock stopping, with causes and solutions.
Guidance on the expected service life based on switching times and duration.
List of available repair parts, their part numbers, and remarks.
General| Contact Form | SPDT |
|---|---|
| Mounting | DIN rail |
| Operating Voltage | 100-240V AC |
| Load Capacity | 5 A |
| Operating Temperature | -10 °C |
| Dimensions | 48mm |
