Panasonic TC-42PX24

24
7.13. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the cabinet assy and the plasma panel fastening
screws (×3 ).
2. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
7.14. Remove the S-Board
1. Remove the Cabinet assy. (See section 7.13.)
2. Remove the screws (×2 ) and remove the S-Board
unit.
3. Disconnect the connector (S2).
4. Remove the Power Button.
5. Remove the screw (×1 ) and remove the S-Board.