TV remote App settings
1. Select TV Remote App settings using / and press
2. Select the item and set
■ TV remote (App)
Enables to control the TV from the network equipment (smartphone, etc.).
●
Set to On to enable the settings below.
1. Select TV Remote using
/ and press
2. Switch On or Off with /
■ Wake on LAN / Wireless LAN
This function allows you to turn on the TV when you use Remote control via
IP.
1. Select Wake on LAN / Wireless LAN using
/ and press
2. Switch Off or On with
/
■ Device to upload contents
Selects device to upload content from the network equipment (smartphone,
etc.).
1. Select Device to upload contents using
/ and press
2. Select device and press
- 60 -
To Next Page
Loading...
