TV Remote App settings
Sets a network-based remote control.
TV Remote:
(On/Off)
Enables to control the TV from the network equipment (smartphone,
etc.).
●
Set to On to enable the settings below.
Wake on LAN / Wireless LAN:
(On/Off)
Turns on the TV via Ethernet using a wake-up message sent from a
device within the home network.
Device to upload contents:
Selects device to upload contents from the network equipment
(smartphone, etc.).
Network link
Settings for DLNA Server.
DLNA server:
(On/Off)
Enables to use this TV as DMS for network devices (DLNA Certified
VIERA)
●
Set to On to enable the settings below.
Registration type:
(Auto/Manual)
Selects the limitation of access to this TV for each device on the home
network.
Auto:
All the available devices on the home network are accessible.
(maximum 16 equipment)
Manual:
Sets the access limitation for each device in the Remote device List.
Remote device list
Lists the available device on the home network.
- 160 -
To Next Page
Loading...
