ANTENNA/Cable setup
MENU Menu > Setup > ANTENNA/Cable setup
ANTENNA/Cable signal
(Cable/Antenna)
Selects signal source connected directly to the ANTENNA/Cable In terminal.
●
When using a Cable or Satellite box, it is recommended to connect the box
to an AV IN terminal and skip this setting.
Channel surf mode
(All/Favorite/Analog only/Digital only)
Sets the mode to select the channel with the Channel up/down button.
Favorite:
Only channels registered as FAVORITE.
Auto program
(All channels/Digital only/Analog only)
●
Select scan type and press to start scanning automatically.
After the scanning is completed, select Apply.
●
All previously saved channels are erased.
- 174 -
To Next Page
Loading...
