Panasonic TC-P42G10

Select "Connection test" and Press OK
÷ When a connection is made to the connection test site
and a message is displayed that indicates a successful
connection
,,®The settings are correct.
® When the connection is not successful
÷ An error message is displayed on the screen.
* Check the connection and settings. (p. 44-45, below)
If you perform the proxy settings, check the proxy
address and the proxy port number.
Set only if specified by the provider.
It is not required for normal household use,
• Proxy address
This is the address of the relay server that is
connected to the target server instead of the browser
and sends data to the browser.
Setting is only required if specified by the provider.
Select "Proxy address" and Press OK
• Proxy port
This number is specified by the provider together with
the proxy address.
_1_Select "Proxy port" and Press OK.
_2_Enter the Port number.
_or
_2_Enter address
(see "Entering characters" below) If you perform the proxy settings, it may make it
impossible to view VIERA CAST movie content.
Select "OK"
You can use the remote control key to enter the alphanumeric characters.
Characters are displayed as shown in following table.
ABC/abc
Navigation area
Switches Input mode alphabet to numeric,
123
1 2 3 4 5 6 7 8 9 10 11 12
1 @ / : 1 1
2 a/A b/B c/C 2 2
3 d/D e/E f/F 3 3
4 g/G h/H i/I 4 4
5 j/J k/K I/L 5 5
6 m/M n/N o/O 6 6
7 p/P q/Q r/R s/S 7 7
8 t/T u/U v/V 8 8
9 w/W x/X y/Y z/Z 9 9
0 ; ? ! ( ) & \ 0 0
LAST * # $ % I { } [ ] *
Space #
® VIERA CAST setting will be effective when you close the menu or run "Connection test".
@
<
m
23
3>
C)
3>
O0
(./3
5"
47