Panasonic TC-P42G10

-_IiRT_ _ Ii[o II i [:-]1oI:-:oF._ R'lli_ll |!
==Assembling the pedestal
® Fix securely with assembly screws _A) (Total 4 screws)
® Tighten screws firmly.
Polo
) Pole
j Front
"'\ Base
(Image: TBLX0091)
llSet-up
® Carry out work on a horizontal and level surface.
® Tighten screws firmly.
Bottom view
Rear side
Hole for pedestal
installation
Pole
Pole
Base
(Image: TC-PSOG10)
Do not disassemble or modify the pedestal.
® Fix securely with assembly
screws ,%. (Total 4 screws)
Accessories
Assembly screws
(4 of each)
(for 42"/46"/50")
M5 x 18 (Silver)
(for 54")
M5 x 25 (Silver)
(for 42"/46"/50")
M5 × 25 (Black)
(for 54")
M5 x 30 (Black)
Poles (2)
k '
SI, F_,h
® Lb or ,_ is printed at the
bottom of the poles.
Base (1)
(for 42"146"150")
(for 54")
® Otherwise the TV may fall over and become damaged, and personal injury may result.
@
3>
@
U3
U3
o
@
O
m,
©
3>
U3
U3
©
(" Caution -)
Do not use any other TV and displays.
® Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
® If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic
Dealer immediately.
During set-up, make sure that all screws are securely tightened.
® If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
9