Slide #41
6 Blinks Error Code (HD Models)
Trouble Mode
SC Energy Recovery Circuit
Defective Board
SC, SS, A, SU,SD, and Loose connections
Warning: Disconnect AC Power prior to making any
disconnection or connection.
LIST OF MODELS: TC-P42X1 TC-P42C1 TC-42PX14 TC-P50X1 TC-P50C1 TC-50PX14
CAUTION: The TV power should not be turned on while
SC2 is disconnected. This could damage the SS board.
If the power LED continues to blink even after the TV is unplugged, press and hold the power
switch on the TV for a few seconds until the LED turns off.
To Next Page
Loading...
