Need help?Do you have a question about the Panasonic TC-P50U2 and is the answer not in the manual?
General| Screen Size | 50 inches |
|---|---|
| Display Type | Plasma |
| Resolution | 1920 x 1080 |
| HDMI Ports | 3 |
| USB Ports | 1 |
| Audio Output | 20W |
| Weight | 68.3 lbs |
| Aspect Ratio | 16:9 |
| Component Video Inputs | 2 |
| Composite Video Inputs | 1 |
| Refresh Rate | 600Hz Sub-field Drive |
| PC Input | Yes |
| Contrast Ratio | 2, 000, 000:1 Native |
General safety guidelines for conducting repairs and servicing operations.
Procedures for measuring leakage current (cold and hot checks) to prevent shock hazards.
Techniques to reduce component damage from static discharge to sensitive devices.
Information about lead-free solder usage, melting points, and handling.
General service hints and layout of major boards within the TV.
Lists supported input signals for Component and HDMI connections.
Comprehensive specifications including power, display, sound, and dimensions.
Procedure to access the service mode using remote control and key commands.
List of adjustable parameters, sample data, and their functions in service mode.
Mirror settings, service tool access, SOS history, and exit procedures.
Hotel mode setup and procedures for data copying via SD card.
Steps to perform and interpret the IIC bus line self-check.
Information on LED flashing patterns to diagnose unit abnormalities.
Troubleshooting steps for No Power, No Picture, and Local Screen Failure.
Purpose and operational guide for the SC jig used in failure board identification.
Procedures for removing the rear cover, AC inlet, and side covers.
Step-by-step guide for removing various internal boards.
Caution and procedures for replacing the plasma panel and K-Board.
Steps to set the Vsus level to LOW or HIGH after component replacement.
Instructions for RF video contrast and white balance adjustments.
Overall and detailed block diagrams illustrating TV circuitry.
Cautions regarding cable assembly and wiring diagrams for internal connections.
Notes on symbols and schematics for the Power Board (3 parts).
Detailed schematics for the A-Board, covering various functions.
Schematics for K, S, SS, SS2, C1, C2, and C3 boards.
Detailed schematics for the SC-Board, covering its four parts.
Foil and component side layouts of the P-Board with parts identification.
Foil and component side layouts for K, S, and SS2 Boards.
Foil and component side layouts of the A-Board.
Foil and component side layouts for C1, C2, and C3 Boards.
Foil and component side layouts of the SC-Board.
Foil and component side layouts of the SS-Board.
Exploded view diagrams and list of mechanical replacement parts.
Illustration and list of accessories provided with the unit.
Comprehensive list of electrical replacement components with part numbers.
To Next Page