Slide 31
OSD images (Menu)
3D Settings Menu
There are two ways to enter the 3D menu to adjust the 3D settings:
1) By pressing the “VIERA Tools” on the remote control
Press remote “VIERA Tools” button, then select “3D”
2) By pressing the “Menu”
button on the remote control
Press remote “MENU” button, then select “Setup” > “3D settings”
Note: Both are actually same menu as next page. However, from VIERA Tools, the message below will be
displayed except when TV(ANT In = Antenna) or HDMI input is selected instead of 3D settings.
Enjoy an entirely new viewing experience with Panasonic 3D.
Display 3D content via an HDMI-connected device or 3D DTV signals
via the Antenna input.
3D
To Next Page
Loading...
