Panasonic TC-P55ST50

19
9.2. Disassembly Procedure for the Unit
9.2.1. Remove the Pedestal stand
1. Remove the Plasma panel section from the servicing
stand and lay on a flat surface such as a table (covered
by a soft cloth) with the Plasma panel surface facing
downward.
2. Remove the screws (×4 )
3. Slide the Pedestal stand to the downside and remove the
Pedestal stand.
9.2.2. Remove the Stand bracket cover
1. Remove the screws (×4 ) and remove the Stand
bracket cover.
9.2.3. Remove the AC cord clamper B
1. Remove the screws (×2 ) and remove the AC cord
clamper B.
9.2.4. Remove the Wi-LAN module
1. Remove the screw (×1 ) and remove the Wi-LAN
module.
9.2.5. Remove the Bluetooth module
1. Remove the screw (×1 ) and remove the Bluetooth
module.
9.2.6. Remove the Rear cover
1. Remove the screws (×18 , ×4 , ×2 ).
2. Remove the M8 caps (×4 ).
3. Remove the Rear cover.