Panasonic TC-P65V10

8
9
Quick Start
Guide
Accessories/Optional Accessory
Accessories
Assembly screws
A
(for 58”)
M5 × 25 (Silver) (4)
(for 65”)
M5 × 30 (Silver) (6)
B
(for 58”)
M5 × 30 (Black) (4)
(for 65”)
M6 × 25 (Black) (4)
Poles (2)
(for 58”)
L
R
L
or
R
is printed at the
bottom of the poles.
(for 65”)
Front
Back
Base (1)
(for 58”)
(for 65”)
Allen wrench
(included tool only for 65”)
C
Accessories/Optional Accessory
Accessories
Check you have all the items shown.
Remote Control
Transmitter
N2QAYB000322
Batteries for the Remote
Control Transmitter (2)
AA Battery
AC cord
Product Registration Card
(U.S.A.)
Customer Care Plan Card
(U.S.A.)
Operating Instructions
Viera Concierge and basic
instruction for HDTV
Installing the remote’s batteries
Pull open
Hook
Note the correct
polarity (+ or -).
Close
Caution
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types
(such as alkaline and manganese
batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
Do not burn or break batteries.
Accessories
Cleaning cloth
RS232C terminal
Specifications
Optional Accessory
Note
In order to maintain the TV’s performance and
safety, be absolutely sure to ask your dealer or
a licensed contractor to secure the wall-hanging
brackets.
Carefully read the instructions accompanying the
plasma TV stand or pedestal, and be absolutely
sure to take steps to prevent the TV from tipping
over.
Handle the TV carefully during installation since
subjecting it to impact or other forces may cause
its panel to crack.
Wall-hanging bracket
(angle)
TY-WK5P1RW (for 58”) TY-WK6P1RW (for 65”)
Attaching the pedestal to TV
■
Assembling the pedestal
[TC-P58V10 (TBLX0102)] [TC-P65V10 (TBLX0126)]
Fix securely with assembly screws
A
.
(Total 4 screws)
Tighten screws firmly.
Fix securely with assembly screws
A
.
(Total 6 screws)
Tighten screws firmly using
Allen wrench
C
A
L
R
Pole
Front
Pole
Base
A
C
Pole
Front
Pole
Base
■
Set-up
Carry out work on a horizontal and level surface.
Tighten screws firmly.
B
Fix securely with assembly
screws
B
. (Total 4 screws)
Rear side
Arrow
mark
Pole
Hole for pedestal
installation
Pole
Base
Bottom view
(Image: TC-P58V10)
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury
may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury
may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result.
Contact your nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Pedestal
TBLX0102
(TC-P58V10)
How to assemble
(p. 9)
TBLX0126
(TC-P65V10)