7
Clamp
AC cord connection
How to fix:
Cable binding instructions
How to release:
Fix by pushing in till a clicking
sound is heard.
Pull up while drawing the knob.
Attach the bands.
Insert the spigot on the two bands into the
pedestal.
Connect cables.
Example of “connection cable routing”
Band
Band
Fastening band
Fastening
Loosening
To tighten.
Pull off.
Keep the knob pressed.
Mains Lead
Clamp
Binding strap
For using the TY-ST42PA50W
Note:
Refer to the operating instruction book of the pedestal.
To Next Page
Loading...
