1
2
3
1
2
3
123
456
789
C
0
OK
IDTV
6
Check that you have the accessories and items shown
Accessories
Operating Instructions Remote Control
Transmitter
(N2QAKB000059)
Mains Lead
(K2CT3DH00018)
Pan European
Guarantee Card
Fitting remote control batteries
• Make sure that the batteries are fi tted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese or use rechargeable (Ni-Cad) batteries.
Pull and hold the hook, then
open the battery cover.
Insert batteries - note correct
polarity ( + and
-
).
“R6 (UM3)” size
Replace the cover.
321
Batteries for the Re mote
Control Transmitter
(2 × R6 (UM3) size)
Clamper
(TMME206) × 2
Ferrite core
J0KF00000018 × 1
(Small size)
Ferrite core
J0KG00000014 × 1
(Large size)
Installing the ferrite core (Small size)
See page 52.
Installing the ferrite core (Large size)
See page 55.
Open
Open
Pull back the tabs.
(in two places)
Press the cable
through and close.
Pull back the tabs.
(in two places)
Press the cable
through and close.
1 Year Guarantee
Registration
To Next Page
Loading...
