Panasonic TH-37PWD7B

34
Select Signal from the “Setup” menu during RGB input signal.
Press to adjust.
Setting RGB sync signal:
Confirm that the input is set to RGB input (this setting is valid only for RGB input
signal).
Auto: The H and V sync or synchronized signal are automatically
selected. If both input, it is selected the H and V sync.
on G: Uses a synchronized signal on the Video G signal, which is input
from the G connector.
VBS: Uses a synchronized signal of Composite Sync input, which is
input from the HD connector.
Displays the H (Horizontal) / V (Vertical) frequencies.
This display is valid only for RGB / PC and DVI input signal.
Display range:
Horizontal 15 - 110 kHz
Vertical 48 - 120 Hz
H-Freq. (kHz) / V-Freq. (Hz)
Setup for Input Signals
Sync
Press to exit from adjust mode.
Sync
Auto
Sync
on G
Sync
VBS
R
1/2
PC
Off
Standby save
Off
Power management
Off
Auto power off
Off
OSD Language English
(
UK
)
Component / RGB-in select
RGB
Input label
Signal
Power save
Setup
1
2
Press ACTION ( ) button
Sync
P-NR
Signal
Auto
H-Freq.
V-Freq.
kHz
Hz
33.8
60.0
[
RGB
]
Cinema reality
Off
Off
H-Freq.
V-Freq.
kHz
Hz
33.8
60.0