32
1
Press to select Manual Labels.
Press to enter the sub-menu field.
3
Press to select Channel.
Press to select the available channel number.
4
Press to select Caption.
5
Press to select the character position.
Press to select the character (refer to your local TV guide).
• Repeat until all characters are added, up to 7 characters can be added for each channel.
• To delete the Channel Caption, press until no character is displayed.
Press to enter your selection.
Note: Only input with signal will be selectable.
2
Press to select RF Input.
Press to select Antenna (A) or Antenna (B).
Press to enter your selection.
Antenna (A)
A: 2
Preset Labels
Manual Labels
Input Labels
RF Input
Channel
Caption
Captions
Menu Navigation
Manual Labels
To enter numbers and captions manually.
To Next Page
Loading...
