6.20. Remove the front bracket
 1. Unlock the cable clampers to free the cable.
 2. Disconnect the couplers (GS52, G1 and G51).
 3. Remove the screws (×5
) and remove the front bracket.
6.21. Remove the G-Board, GK-
Board and GS-Board
 1. Remove the front bracket. (See section 6.20.)
 2. Remove the screws (×3
) and remove the metal cover.
 3. Remove the screws (×3 ) and remove the front side
metal frame.
 4. Remove the screws (×5 ) and disconnect the couplers
(G3-GK3).
 5. Remove the G-Board, GK-Board and GS-Board.
6.22. Remove the speaker L, R
 1. Remove the screws (×2 each) and remove the speaker
L, R.
6.23. Remove the S-Board
 1. Disconnect the coupler (S1).
 2. Remove the screws (×2
) and remove the S-Board metal
frame.
 3. Remove the screws (×2
) and remove the S-Board.
15
TH-37PX60U / TH-42PX60U