23
7.18. Remove the K-Board
1. Remove the S-Board. (See section 7.17.)
2. Unlock the cable clampers to free the cable.
3. Remove the screws (×2 ).
4. Disconnect the connectors (K1) and remove the K-Board.
7.19. Remove the Plasma panel sec-
tion from the Cabinet assy
(glass)
1. Remove the stand brackets (left, right) fastening screw
(×1 each).
2. Remove the cabinet assy and the plasma panel fastening
screws (×7 ).
3. For leaving the plasma panel from the front frame, pull the
bottom of the cabinet assy forward, lift, and remove.
4. Remove the spacers and spacer rings (×6 ).
To Next Page
Loading...
