7
TH-42LRU20
4 Specifications
Power Source AC 110-127 V, 60 Hz
Power Consumption
Rated Power Consumption 206 W
On mode Average
Power Consumption*
113 W
Standby condition 0.9 W
Display panel
Aspect Ratio 16:9
Visible screen size 42" class (42.0 inches measured diagonally)
(W × H × Diagonal) 36.6 " × 20.6 " × 42.0 " (930 mm × 523 mm × 1,067 mm)
(No. of pixels) 2,073,600 (1,920 (W) × 1,080 (H)) [5,760 × 1,080 dots]
Sound
Speaker 1-way 2 speakers slim under SP System
Audio Output 20 W [10 W + 10 W] (10 % THD)
PC signals VGA, SVGA, XGA, WXGA, SXGA
Horizontal scanning frequency 31 - 69 kHz
Vertical scanning frequency 59 - 86 Hz
Channel Capability-
ATSC/NTSC (Digital/Analog)
VHF/ UHF: 2 - 69, CATV: 1 - 135 (support MPEG4 H.264 decode)
Operating Conditions Temperature: 32 °F - 95 °F (0 °C - 35 °C)
Humidity: 20 % - 80 % RH (non-condensing)
Connection Terminals
VIDEO IN 1-2 VIDEO: RCA PIN Type × 1 1.0 V [p-p] (75-ohm)
AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]
COMPONENT IN Y: 1.0 V [p-p] (including synchronization)
P
B
, P
R
: ±0.35 V [p-p]
AUDIO L-R: RCA PIN Type × 2 0.5 V [rms]
HDMI 1-3 TYPE A Connector × 3
PC D-SUB 15PIN: R,G,B / 0.7 V [p-p] (75-ohm)
HD, VD / 1.0 - 5.0 V [p-p] (high impedance)
SERIAL CTRL M3 Jack × 1 (RS232C)
DATA/MTI RJ-11C (6pin)
• Multiple Television Interface (MTI)
• Nintendo Controller Power (pin3: DC12V / 30mA (max))
• SNES Controller
Audio out M3 JACK × 1 0.5 V [rms] (high impedance)
Card slot SD CARD slot × 1
DIGITAL AUDIO OUT PCM / Dolby Digital, Fiber Optic
FEATURES 3D Y/C FILTER, CLOSED CAPTION,
V-Chip, Vesa compatible, Integrated Pro: Idiom
Dimensions (W × H × D)
Including TV stand 40.2 " × 26.9 " × 12.6 " (1,021 mm × 682 mm × 318 mm)
TV Set only 40.2 " × 25.1 " × 4.2 " (1,021 mm × 637 mm × 105 mm)
Mass
Including TV stand 47.7 lb. (21.6 kg) NET
TV Set only 38.6 lb. (17.5 kg) NET
* Based on IEC 62087 Ed.2 section 11.6.1 measurement method.
Note:
• Design and specifications are subject to change without notice. Mass and dimensions shown are approximate.
To Next Page
Loading...
