9 Service Mode Function
MPU controls the functions switching for each IICs through IIC bus in this chassis. The following setting and adjustment can be
adjusted by remote control in Service Mode.
9.1. How to enter SERVICE 1
1. In sound menu, set BASS to MAXIMUM, and set TREBLE to MINIMUM.
2. Simultaneously press INDEX button on remote control and DOWN button [
] on the TV set.
9.2. How to enter SERVICE 2
1. Set the channel to CH99.
2. Select the SPL Gain.
3. Press HOLD button on remote control.
Note:
To exit to Service mode, press N or Power button on remote control.
23
TH-42PA50A / TH-42PA50H / TH-42PA50M / TH-37PA50H / TH-37PA50M
To Next Page
Loading...
