6
Check that you have the accessories and items shown
Accessories
Operating Instructions
Mains Lead
Clamper × 2
Fitting remote control batteries
• Make sure that the batteries are fi tted the correct way round.
• Do not mix old batteries with new batteries. Remove old, exhausted batteries immediately.
• Do not mix different battery types, i.e. Alkaline and Manganese.
• Do not use rechargeable (Ni-Cad) batteries.
+
+
-
-
Pull and hold the hook, then
open the battery cover.
Insert batteries - note correct
polarity ( + and
-
).
“R6 (AA)” size
Replace the cover.
321
Remote Control Transmitter
(N2QAJB000154)
Batteries for the Re mote
Control Transmitter
(2 × R6 (AA) size)
To Next Page
Loading...
