Panasonic TH-42PX6U

6.20. Remove the front bracket
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (G1 and G51).
3. Remove the screws (×2
) and remove the front bracket.
6.21. Remove the G-Board and GK-
Board
1. Remove the front bracket. (See section 6.20.)
2. Remove the screws (×3
) and remove the front side
metal frame.
3. Remove the screws (×3 ) and disconnect the couplers
(G3-GK3).
4. Remove the G-Board and GK-Board.
6.22. Remove the S-Board
1. Disconnect the coupler (S1).
2. Remove the screws (×2
) and remove the S-Board metal
frame.
3. Remove the screws (×2
) and remove the S-Board.
6.23. Remove the stand brackets
1. Remove the plasma panel section from the servicing stand
and lay on a fiat surface such as a table (covered) with the
plasma panel surface facing downward.
2. Remove the stand brackets (left, right) fastening screws (×5
each) and remove the stand brackets (left, right).
15
TH-42PX600U