Panasonic TH-42PX6U

1. Purpose
Restrict a function for hotels.
2. Access command to the Hotel mode setup menu
In order to display the Hotel mode setup menu, please enter
the following command (within 2 second).
[TV] : Vol. “Down” + [REMOTE] : TV/VIDEO (3 times)
Then, the Hotel mode setup menu is displayed.
3. To exit the Hotel mode setup menu
Disconnect AC power code from wall outlet.
4. Explain the Hotel mode setup menu
item Function
Mode Select hotel mode ON/OFF
Input Select input signal modes.
Set the input, when each time power is
switched on.
Selection:
Off/RF/COMP1/COMP2/HDMI1/HDMI2/VID
EO1/VIDEO2/VIDEO3/PC
· Off: give priority to a last memory.
Channel Select channel when input signal is RF.
Set the channel, each time power is switched
on.
Selection:
Any channel number or “-”.
“-” means the channel when turns off.
Volume Adjust the volume when each time power is
switched on.
Range:
0to63
Vol. Max Adjust maximum volume.
Range:
0to63
OSD Ctrl Restrict the OSD.
Selection:
OFF/PATTERN1
· OFF: No restriction
· PATTERN1: restriction
FP Ctrl Select flont key conditions.
Selection:
Off/Pattern1/All
· Off: altogether valid.
· Pattern: only input key is valid.
· All: altogether invalid.
Pow Ctrl Select POWER-ON/OFF condition when AC
power cord is disconnected and then
connected.
OFF: The same condition when AC power
cord is disconnected.
ON: Forced power ON condition.
13 Hotel mode
44
TH-42PX600U