English
13
Band (2)
Screw (2)
Wood screw (2)
L
M
K
L
M
K
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2 Pull out the cover.
3 Remove the assembly screws
from the TV.
4 Pull out the pedestal from the TV.
5 Remove the assembly screws
from the bracket.
■ Preventing the TV from falling over
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
●
This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
50-inch model
58-inch model
Attaching the fall-prevention parts
Band (2)
Wood screw (2)
1 Remove the screws
.
J
2 Attach the fall-prevention parts.
H
J
I
H
J
I
65-inch model
Attaching the fall-prevention parts
To Next Page
Loading...
