Digital TV
Some features are not available on all models.
Before requesting service or assistance, please follow these simple guides to
solve the problem.
If the problem still persists, please contact your local Panasonic dealer for
assistance.
●
Due to the digital reception technologies involved, quality of the Digital TV
signals may be relatively low in some cases, despite good reception of
Analogue TV channels.
No satellite channel is found
●
Set LNB Band Frequency in LNB Configuration to suit your environment.
Watching > Tuning and editing channels > Auto Tuning
Unable to receive signals with a high-performance aerial
●
Install an aerial individually for the TV and VCR (or use a splitter).
Interference or frozen / disappearing image
●
Check Signal Condition. If the level of Signal Quality is low, check aerial or
dish.
Watching > Tuning and editing channels > Signal Condition
●
Turn the TV off with Mains Power On / Off switch, then turn it on again.
Faulty dish message appears
●
The satellite cable may be short-circuited or there may be connection
problems of the cable. Check the cable and connection and then turn the
TV off with Mains Power On / Off switch, and turn it on again.
●
If the message persists, consult a dish installer for checking the dish and
cable.
- 270 -
To Next Page
Loading...
