6. Select Auto Tuning and press OK to access.
7. Select Search Mode / Scan Mode and press OK to access.
8. Set the item and press OK to store.
●
Scan Mode
Quick:
Scans the suitable frequency for the selected satellite.
Full:
Scans the whole frequency range.
●
After settings, select Start scan and press OK to access.
9. A confirmation screen is displayed and press OK to access.
10. Select the region and press OK to start Auto Tuning. (Settings are made
automatically.)
●
When the operation is completed, the channel at the lowest position will
be displayed.
●
If no satellite channel is found, set LNB Band Frequency in LNB
Configuration to suit your environment.
■ Digital TV / Analogue TV
1. Select Auto Tuning and press OK to access.
2. A confirmation screen is displayed and press OK to start Auto Tuning.
(Settings are made automatically.)
●
When the operation is completed, the channel at the lowest position will
be displayed.
●
This setting is applicable only for the selected TV mode.
■ Auto Tuning using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set Auto Tuning with following control panel buttons.
●
Move the cursor / select from a range of options / select the menu item
●
Access the menu / store settings after adjustments have been made or
options have been set with INPUT/OK/HOLD for MENU button
- 95 -
To Next Page
Loading...
