Editing Timer Programming
1. Display the menu with MENU.
2. Select Timer > Timer Programming and press OK to access.
3. Select the event.
●
To change a timer event
OK
– Correct as necessary.
Recording > Timer Programming > Setting Timer Programming
●
To delete a timer event
1) Press
(red).
2) Press OK to delete.
■ To adjust the clock
If you cannot get the time information, set Clock Settings manually.
1. Display the menu with MENU.
2. Select Timer > Clock Settings > Mode and press OK to access.
3. Select Manual and press OK to set.
4. Set Date / Time with Cursor buttons or Numeric buttons.
●
Clock Settings are reset when the TV is turned off with Mains Power On /
Off switch.
Watching > Basic > Adjusting time
■ To stop recording
1. Press .
2. Select the programme and press OK to access (when 2 recordings are in
progress).
3. Select Yes and press OK to stop.
- 121 -
To Next Page
Loading...
