EN32
How to change
The settings can be changed according to the usage. (This operation is not available while water
is fl owing or during automatic electrode cleaning.)
Pressing the water quality selector buttons during operation returns to the main screen. (P. EN11)
Preparation : Turn off the faucet.
1
Press to select the “Setting change”,
and press .
Pi
Pi
2
Select the item to be changed with
Pi
, and press .
Pi
3
Pi
, and press .
Select the setting content with
Pi
After the setting is complete, the screen immediately returns to the screen in step 2.
Press
(twice) to select [Back], and press to return to the main screen.
Items which can be change
: Default settings
Items Setting contents
1 Buzzer volume
High /
Medium
/ Low
The buzzer volume can be adjusted in 3 steps.
2
Weak acidic buzzer
ON
/ OFF
Setting this item to “OFF” disables the buzzer while weak acidic water or acidic water is used. (P. EN27)
3 Alkaline priority
ON /
OFF
Setting this item to “ON” automatically restores the water quality mode to “Alkaline 1” to
“Alkaline 3” previously used 10 minutes after “Purifi ed” is used.(P. EN27)
4 Language
English
（英 文）
/ Traditional Chinese（繁 體 中 文）
You can select either “English” or “Traditional Chinese”.
5 Initialization
The setting contents from
1
to
5
are restored to the state at the time of purchase (factory default).
Changing the Settings
TK-AS700_En.indb 32TK-AS700_En.indb 32 2022/04/14 18:18:042022/04/14 18:18:04
To Next Page
Loading...
