3
Perform the touchscreen calibration as follows.
A Click [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].
The calibration screen appears.
B Using the stylus, touch each of the 12 “+” target marks one by one until it blinks.
C Click [Calibration].
D Click [Save & Exit].
z Return the rotated display to [0 degrees] before the touchscreen calibration.
z Perform the touchscreen calibration for each user.
z The following keys can be used on the calibration screen.
•
Home
key: Moves to the test screen.
•
Tab
key: Switches the cursor on or off.
• Î Í Ï Ð key: Moves the target.
•
Esc
key: Cancels.
Touchscreen Calibration
Keep touching the tar-
get mark until it blinks.
NOTE
CF-19mk1_Ford_SI.book 3 ページ ２００７年８月２０日 月曜日 午後７時２８分
To Next Page
Loading...
