Panasonic Toughbook CF-19KHRAG2M - Page 17

17
Getting Started
Digitizer Calibration
A
Run [Tablet PC Settings].
Click
(Start) - [Control Panel] - [Mobile PC] - [Tablet PC Settings].
B
Click [Calibrate].
C
Using the digitizer pen, touch each of the 4 “+” target marks one by one, and
then click [OK].

Perform the calibration for the orientation to be used.
Touchscreen Calibration
Return the rotated display to [Primary Landscape] before the touchscreen cali-
bration.
A
Run [Touch Settings].
Click (Start) - [Control Panel] - [Hardware and sound] - [Touch Settings].
B
Click [Calibrate...].
C
Touch each of the 9 “+” target marks one by one, and then click [Finished].
D
Restart the computer.

Do not use the digitizer pen for touchscreen calibration.
Perform the calibration for the orientation to be used.
A
Run [Touch Settings].
Click (Start) - [Control Panel] - [Hardware and sound] - [Touch Settings].
B
Press
Ctrl
and click [Calibrate...].
C
Touch each of the 4 “+” target marks one by one, and then click [Finished].
D
Restart the computer.
Digitizer Calibration
A
Run [Tablet and Pen Settings].
Double-click or click [start] - [Control Panel] - [Printers and Other Hard-
ware] - [Tablet and Pen Settings].
B
Click [Settings] - [Calibrate].
C
Using the digitizer pen, touch each of the 4 “+” target marks one by one, and
then click [OK].

Perform the calibration for both [Landscape] and [Portrait].
Touchscreen Calibration
Return the rotated display to [Primary Landscape] before the touchscreen cali-
bration.
A
Run [Touch Settings].
Click [start] - [Control Panel] - [Other Control Panel Option] - [Touch Set-
tings].
B
Click [Calibrate...].
C
Touch each of the 9 “+” target marks one by one, and then click [Finished].
D
Restart the computer.

Do not use the digitizer pen for touchscreen calibration.
Perform the calibration for the orientation to be used.
A
Run [Touch Settings].
Click [start] - [Control Panel] - [Other Control Panel Option] - [Touch Set-
tings].
B
Press
Ctrl
and click [Calibrate...].
C
Touch each of the 4 “+” target marks one by one, and then click [Finished].
D
Restart the computer.
10 Create a new account.
Click [start] - [Control Panel] - [User Accounts] - [Create a new account].
CAUTION

Remember your password. If you forget the password, you cannot use the Win-
dows operating system. Creating a password reset disk beforehand is recom-
mended.
CF-19CTQZZBM.indb 17CF-19CTQZZBM.indb 17 6/15/2009 2:10:27 PM6/15/2009 2:10:27 PM