Why my Panasonic Laptop will not automatically enter sleep/hibernation?
If your Panasonic Laptop is not automatically entering sleep or hibernation, ensure you've configured access point settings if you're connected to a network via wireless LAN. If you are not using wireless LAN, disable the wireless LAN function. Also, ensure that you are not running any software that regularly accesses the hard disk.
How to fix Panasonic Toughbook CF-19KHRAG2M that won't shut down?
If your Panasonic Laptop will not shut down or restart, try removing any connected USB devices. Shutdown may take one or two minutes.
What to do if my Panasonic Toughbook CF-19KHRAG2M cannot enter sleep or hibernation?
If your Panasonic Laptop is unable to enter sleep or hibernation, try temporarily removing any USB devices. If the issue continues, restart your computer. Remember that it might take a minute or two to enter sleep or hibernation. Also, the computer might not enter sleep mode if it's communicating via modem, or immediately after resuming.
Why my Panasonic Toughbook CF-19KHRAG2M cannot enter sleep or hibernation automatically?
To resolve the issue of your Panasonic Laptop not automatically entering sleep or hibernation, disconnect any peripheral devices.
What to do if Panasonic Toughbook CF-19KHRAG2M Laptop Accessories sensor does not recognize fingerprint?
If the sensor on your Panasonic Laptop Accessories isn't recognizing your fingerprint, there might be a few reasons. Ensure you slide your finger correctly. Your finger may be too rough, dry, wet with water or sweat, or soiled with mud or oil. Try washing and drying your hands or cleaning the fingerprint sensor. If your skin is extremely dry, use hand cream. If your fingerprint has faded, consider registering or authenticating with a different finger.
What to do if I can't use my enrolled finger on Panasonic Laptop Accessories?
If you can't use an enrolled finger on your Panasonic Laptop Accessories (e.g., due to injury), and you only enrolled one finger, enroll additional fingerprints using the “Enroll or Edit Fingerprints” wizard. If you enrolled multiple fingers, simply use another finger. You may also try logging on to Windows as an Administrator, or updating the enrolled fingerprints.
Why is the TPM failing on my Panasonic Toughbook CF-19KHRAG2M Laptop Accessories?
A TPM failure on your Panasonic Laptop Accessories may occur if the TPM is broken, erased, or disabled. If you do not use the “Advanced Security” backup password, follow the “Starting Over” instructions. If you use the “Advanced Security” backup password, follow these steps: Enter the “Enroll or Edit Fingerprints” wizard using the backup password and disable “Advanced Security” and finish.
What happens when replacing the sensor on Panasonic Toughbook CF-19KHRAG2M Accessories?
When replacing the sensor on your Panasonic Laptop Accessories, if enrollment to hard disk is used, “Protector Suite QL” has not stored any data on the device, so there is no problem to continue after you replaced the sensor. If the fingerprint has been enrolled to the device, a new passport will be required.
What to do if I can't access “My Safe” after uninstalling Protector Suite QL on Panasonic Toughbook CF-19KHRAG2M Laptop Accessories?
If you accidentally uninstalled Protector Suite QL on your Panasonic Laptop Accessories and can't access “My Safe”, reinstall it.
General| Model | CF-19KHRAG2M |
|---|---|
| Processor | Intel Core i5 |
| RAM | 4 GB |
| Resolution | 1024 x 768 |
| Operating System | Windows 7 Professional |
| Display | 10.4" Touchscreen |
| Graphics | Intel HD Graphics |
| Wireless | Wi-Fi 802.11 a/b/g/n |
| Waterproof | IP65 |
| Shockproof | MIL-STD-810G |
| Dustproof | IP65 |
To Next Page
