47
External Display
To change the display settings
1 Right-click the desktop, and click [Graphics Properties].
2 Click [Extended Desktop], and select the settings for [Primary Device] and [Secondary
Device].
3 Click [Display Settings] and set the display color and resolution etc.
4 Click [OK].
NOTE
z It may not be possible to use the extended desktop with some software applications.
z When you click the maximize button, the window is displayed on one of the displays. You cannot move the maximized
window to the other display.
z You cannot switch the display by pressing
Fn
+
F3
.
z Do not use the display rotation in the extended desktop.
z To switch left (primary device) and right (secondary device), once return the display to “notebook only”. Follow the
steps below.
A Right-click the desktop and click [Graphics Options].
B Click [Output To] - [Notebook].
C Right-click the desktop and click [Graphics Options].
D Click [Output To] - [Extended Desktop], and click [Monitor + Notebook] (the external display will be set to primary
device) or [Notebook + Monitor] (the internal LCD will be set to primary device).
z To switch to the Extended Desktop, be sure to use the [Intel(R) GMA Driver for Mobile] screen or the [New Display
Detected] screen. If you use other methods (e.g. display setting, etc.), the screen may not be displayed correctly.
z The pop-up icon displayed by
Fn
key combination appears only on the primary device.
z Set the internal LCD to the primary device when using the touchscreen (only for model with touchscreen) or digitizer
(only for model with digitizer). The cursor will move on the primary device when you touch the internal LCD.
To Next Page
Loading...
Need help?
General
